項 目 介 紹
Project introduction
該工程屬于氣承式充氣膜結構,平面投影為矩形,尺寸115米 x 70米,膜頂部標高28.3m,膜內部容積約13萬方。主體氣膜布置斜向網狀鋼纜系統,有效提高氣膜承載能力和控制氣膜的變形量,整個膜面采用夾板鏈連接方式劃分為5個膜單元,氣膜設置2個車輛通道,3個緊急出口和1個旋轉門,氣膜配置有機械單元系統和尾氣凈化處理系統。
Guangzhou Hongyun Coating Factory Polluted Soil Storage Air-supported Membrane Structure
This project belongs to air-supported membrane structure. The plane is a rectangular of 115m x 70m, and the top elevation is 28.3m. The room volume is about 130 thousand cube meter. A safety cable net system is used to improve the capacity of bearing wind load and reduce the deformation. The membrane surface is divided into 5 membrane units by the splint chain connection mode. There are 2 vehicle entrances, 3 emergency exits and 1 rotary door. The intelligent pneumatic control system, emission gas detecting & processing system and automatic alarm system are employed.
竣工時間:2016年12月 Completion time: Dec. 2016
建設地點:廣州 Construction site: Guangzhou
結構形式:充氣式 Structure form: Air-supported membrane structure
膜 面 積:13000平米 Membrane area: 13000 square meters
膜材型號:科寶PVDF膜材 Membrane Material: Kobond PVDF